How to replace Polarize Film
Technically, this process MUST be done in a clean room environment with the special equipments.
However, for the samller screen (8.4 inch and less),such as GPS and iPhone screen,
you should be able to complete this process by simply using a paint roller.
|
This instruction is based on Apple iPhone. Make sure your LCD screen is
cleaned |
|
|
iPhone Polarize Film--The polarize film is protect by two clear
plastic films. |
|
|
0pt">First identify the bottom side and then peel it off the clear plastic(just peel it off about
1/2 of Polariz film) start with on one corner (Shown Photo)
|
|
|
|
Place the polarize film on top of screen and align the position |
|
|
|
Now slowly peel
off the bottom plastic while you roll over on the top of film (Shown Photo)
0
|
|
|
|
Peel off the top plastic film
|
|
|
If there are bubbles, you can use a clean towel and slowly
push them out.
|
|
|
|
|
LST01
No more guess works!
LST01 is a custom build tester for Laptop screen repair;
it can help you to isolate the problem between CCFL Backlight Lamp and Inverter in seconds.
Save Time! Save money!
|
|
LST02
It has all LST01’s features, plus a built–in LCD Controller
that equips with our proprietary driver. It allows you to apply any
test pattern through VGA input and test all types of specification on the LCD
and LED Screen. In addition, a custom design Inverter allows you
to test any given number of CCFL back light lamp up to 4 at the time. |
|
IT01
IT01 is design to test multiple backlight lamps inverter;
it is capable to test any type of inverter up to 6 lamps at the time!
|
|
IT02
Stand alone Inverter tester!
The advantage of this custom build tester is that, you can apply any input voltage
through DC Jack to test inverter from Laptop to LCD TV inverter.
|
|
|