Skip Navigation Links Blog | My Account
HyperLink
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


HyperLink

MS610UB LED Driver

MS610UB, our newest LED driver; It is custom design for 10.4 inch or smaller industrial LED screen. MS610UB is small and compact that you can mount it anywhere on the back of LCD by using a double side tape. MS610UB can driver both UB and XB series LED strips.
Dimension: 80mm (3.15") X 20mm (0.79") X 6.60mm (0.26")
HyperLink
There are 4 build-in jumpers allow you to easily configure to different size of LED strip: JP1 (2R0), JP2 (1R0, JP3 (1R5) and JP4 (R82). However, you do not need to worry about it, because, it is set when you purchase LED kit with MS610UB.
Disable Enable
For 12V DC, On CN1, add a piece of wire or solder between VIN and ENA. That’s it! Then just apply DC voltage to VIN(Positive) and negative to GND (power Ground).
For +24V DC supply voltage, after shorted VIN(+24V ) to ENA, you do need to add a resistor (between 2K to 3K) on top of C4 as shown below. Then just apply DC voltage to VIN(Positive) and negative to GND (power Ground).
 
Datasheet HyperLink
TST01
TST01 – custom build for testing 4 wires, 5 wires and 8 wires resistive touch screen.
HyperLink
LST05-V3
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
HyperLink
IT03
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
HyperLink
LST01
No more guess works!
LST01 is a custom build tester for Laptop screen repair; it can help you to isolate the problem between CCFL Backlight Lamp and Inverter in seconds.
Save Time! Save money!
HyperLink
LST04 - No setup time
Small and compact, easy to use, with build-in Color bar generator, you can test LCD screen size up to 60”
HyperLink
IT01
IT01 is design to test multiple backlight lamps inverter; it is capable to test any type of inverter up to 6 lamps at the time!
HyperLink
IT02
Stand alone Inverter tester!
The advantage of this custom build tester is that, you can apply any input voltage through DC Jack to test inverter from Laptop to LCD TV inverter.
HyperLink
UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with dual or 4 CCFL backlight lamps.
HyperLink
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
HyperLink
Retrofit LCD monitorfor MDT962B-1A
HyperLink

Retrofit LCD monitor for Mazak DR-5614
HyperLink

Sunlight Readable SKD kit
HyperLink
 
Copyright © 1996-2018 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog