Skip Navigation Links Blog | My Account
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


Instruction Detail

* CCFL is an extremely small Fluorescent lamp and you must handle them with extra caution.
* Our LED Backlight Kit comes with a pre-installed wire harness, so there is no soldering required.

A Picture Is Worth A Thousand Words.


Need help on soldering CCFL Lamp? Click here

Brand: AUO
Model: M150XN07
Instruction Type: CCFL

Step 1: This instruction is based on AUO M150XN07 LCD panel. First Remove the metal cover.
Step 2: Use a small flat head screw driver and separating between plastic frame and metal frame. You also need to open another two sides, too

Step 3: Set teh panel face down and remove metal frame

Step 4: Remove CCFL’s wire harness as shown on the photo

Step 5: Remove small Philips screen that hold reflector

Step 6: Carefully tilt up the interface board and flip over as shown on next photo

Step 7: Remove Plastic frame as photo shown

Step 8: diffusion sheets and set them aside. Note: Please do not mess up the order of these sheets

Step 9: Lift up the light guiding Plexiglas and pull out CCFL reflector

Step 10: Please be careful when you install reflector back to the light guiding Plexiglas. The metal click must line up with Plexiglas as shown photo. The replacement Back Light Lamp part number is AUO24314
To purchased the parts, simply copy the part number and paste at search box at


Installing a XB Series LED Backlight Kit on Laptop Screen
Disassembly Laptop screen (Photo shown below). It is the exact same procedure as replacing CCFL backlight Lamp. Set aside CCFL Reflector assembly (No longer need it).

Remove double side tape cover on LED Strip
Tape XB LED Strip at the bottom edge of Laptop Screen, where it use to mount CCFL Backlight Assembly as photo shown below

Please click here for more detail about mounting LED backlight

We do offer CCFL Backlight Replacement service. Please click here for more details.
Troubleshooting Tools:
Symptoms by the pictures:

TST01 – custom build for testing 4 wires, 5 wires and 8 wires resistive touch screen.
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
No more guess works!
LST01 is a custom build tester for Laptop screen repair; it can help you to isolate the problem between CCFL Backlight Lamp and Inverter in seconds.
Save Time! Save money!
LST04 - No setup time
Small and compact, easy to use, with build-in Color bar generator, you can test LCD screen size up to 60”
IT01 is design to test multiple backlight lamps inverter; it is capable to test any type of inverter up to 6 lamps at the time!
Stand alone Inverter tester!
The advantage of this custom build tester is that, you can apply any input voltage through DC Jack to test inverter from Laptop to LCD TV inverter.
UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with dual or 4 CCFL backlight lamps.
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
Retrofit LCD monitorfor MDT962B-1A

Retrofit LCD monitor for Mazak DR-5614

Sunlight Readable SKD kit
Copyright © 1996-2020 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog