Instruction Detail
* CCFL is an extremely small Fluorescent lamp and you must handle
them with extra caution.
* Our LED Backlight Kit comes with a pre-installed wire harness, so there is no soldering required.
A Picture Is Worth A Thousand Words.
Tools
Need help on soldering CCFL Lamp?
Click here
Brand:
AUO
Model:
B154EW01
Instruction Type:
CCFL
Step 1:
Step1
Step 2:
2. Remove Screws on each side of panel
Step 3:
3. remove screws on CCFL Reflector on both ends
Step 4:
4. Peel of protective plastic film, be careful, do not damaged the TAB
Step 5:
5. Peel of protective plastic film, be careful, do not damaged the TAB
Step 6:
6. Peel off aluminum foil that covered the reflector
Step 7:
7. Remove on the top and bottom of panel
Step 8:
8. Place panel face down and remove metal frame
Step 9:
9. Remove CCFL Assembly
Step 10:
10. Pull out CCFL and replace it.The part number for CCFL backlight lamp is AUO20336. The part number for a CCFL with wire harness is MS140X450CWH336
To purchased the parts, simply copy the part number and paste at search box at
http://Store.lcdparts.net
|
Installing a XB Series LED Backlight Kit on Laptop Screen
Disassembly Laptop screen (Photo shown below). It is the exact same procedure as replacing CCFL backlight Lamp.
Set aside CCFL Reflector assembly (No longer need it).
Remove double side tape cover on LED Strip
|
|
|
Tape XB LED Strip at the bottom edge of Laptop Screen, where it use to mount CCFL Backlight Assembly as photo shown below |
|
Please click here for more detail about mounting LED backlight
We do offer CCFL Backlight Replacement service.
Please
click here for more details.
Troubleshooting Tools:
Symptoms by the pictures:
|
LST01
No more guess works!
LST01 is a custom build tester for Laptop screen repair;
it can help you to isolate the problem between CCFL Backlight Lamp and Inverter in seconds.
Save Time! Save money!
|
|
LST03 - No need to install drivers
It has all LST01’s features, plus a built–in LCD screen controller that equips with our proprietary drivers.
By simply changing the front panel setting, it allows you to test LCD from 8.9” to 42” LCD screen
|
|
IT01
IT01 is design to test multiple backlight lamps inverter;
it is capable to test any type of inverter up to 6 lamps at the time!
|
|
IT02
Stand alone Inverter tester!
The advantage of this custom build tester is that, you can apply any input voltage
through DC Jack to test inverter from Laptop to LCD TV inverter.
|
|
UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with dual
or 4 CCFL backlight lamps.
|
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are
commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
|
45 Piece Screw Driver Set
|
|