Skip Navigation Links Blog | My Account
HyperLink
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


HyperLink

IT02 - How to test Inverter

How to Use IT02
Identify the part number of your inverter
Go to “Inverter by Number--> “Detail
All Pin Assignments and Connector are available at Detail page
Connect One end of wire harness to the terminal
Connect other end to inverter
Connect back light lamp to Inverter output.
Connect 12V Adapter to IT02
Push red switch on (On/Off Button)
Push Green Switch on (Enable), If back light stays on, then, the inverter is working fine
Push Black switch on (ADJ), if brightness level change, then the dimming control is working fine.
Te get the best test result, we would recommend that you use it IT02 with LST01 or IT01.
The following pictures show you how to test inverter.
 
Price: $36.99 - $3 for shipping by USPS
LST02

Pin Number Definition
Laptop Inverter:
P1 is the first pin at the top of inverter as shown photo.
Desktop Inverter:
P1 is the first pin on the left side of connector as shown photo.
LCD TV Inverter:
P1 is the first pin on the left side of connector as shown photo.
 



TST01
TST01 – custom build for testing 4 wires, 5 wires and 8 wires resistive touch screen.
HyperLink
LST05-V3
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
HyperLink
IT03
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
HyperLink
LST01
No more guess works!
LST01 is a custom build tester for Laptop screen repair; it can help you to isolate the problem between CCFL Backlight Lamp and Inverter in seconds.
Save Time! Save money!
HyperLink
LST04 - No setup time
Small and compact, easy to use, with build-in Color bar generator, you can test LCD screen size up to 60”
HyperLink
IT01
IT01 is design to test multiple backlight lamps inverter; it is capable to test any type of inverter up to 6 lamps at the time!
HyperLink
IT02
Stand alone Inverter tester!
The advantage of this custom build tester is that, you can apply any input voltage through DC Jack to test inverter from Laptop to LCD TV inverter.
HyperLink
UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with dual or 4 CCFL backlight lamps.
HyperLink
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
HyperLink
Retrofit LCD monitorfor MDT962B-1A
HyperLink

Retrofit LCD monitor for Mazak DR-5614
HyperLink

Sunlight Readable SKD kit
HyperLink
 
Copyright © 1996-2019 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog