Skip Navigation LinksHome > Products > LED Backlight - UB Series > UB Detail Blog | My Account
HyperLink
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


HyperLink

UB Series LED Backlight Kit  - Sunlight Readable

UB LED Backlight Advantage:
  • High Brightness LED backlight up to 1800 nits
  • Improved dynamic contrast ratio up to 1500:1
  • Improved color gamut for more life-like images
  • longer lifespan, typically lasting over 100,000 hours
  • High shock/vibration resistant
  • Low Heat Generation.
  • Environmental Benefits.

Buy Now

Part NumberUB100370LED4530X2
Price$159.99
DescriptionLED backlight Kit for 18.1" SXGA LM181E06-A4M1 Industrial LCD

HyperLink
Dip Switch Configuration
Caution: Please power down before change settings

Product Catalog HyperLink
Caution: Please power down before change settings
Part NumberUB*HighDefaultLowUL**
UB100370LED4530X2     
*Ultra Bright, this setting may cause shorter life of LED on some LCD screens due to the heat, especially those LCD screens that have the plastic frame instead of Aluminum or metal frame. However, if you prefer to use this setting, we would recommend that you add an additional aluminum heaksink.

** Ultra Low, this setting consumes much less current while maintaining higher brightness level than CCFL lamp. The life of LED will last much longer, typically 10 times longer than CCFL.

R9 Resistor MUST be remove on some settings that have (R9)
 
How to connect MS456UB to the existing inverter wire harness
The easiest way would be when JP2 is shorted. Just simply apply VIN (Red wire, typically 12V DC) and GND (Black) to MS456UB.
Note: MS456UB can also accept 24V DC input. Please let us know at the checkout if you have a 24V DC supply.

However, in most of case, you do need to connect “ENA” to turn LED backlight On/Off because 12V DC is always present at VIN, even when unit has powered off. 6 pin wires are color coded: Red=VIN, Yellow=ENA, White=ADJ and Black-GND Recommended

Need help to identify inverter's pin assignment?  Please click here

How to connect MS610UB to the existing inverter wire harness
The easiest way would be add a pices of wire or solder between VIN and ENA on CN1. Then, just simply apply VIN (Red wire, typically 12V DC) and GND (Black) to MS610UB.
Note: VIN=12V to 24V DC.
MS610UB - Pin Out
However, in most of case, you do need to connect “ENA” to turn LED backlight On/Off because 12V DC is always present at VIN, even when unit has powered off. 6 pin wires are color coded: Red=VIN, Yellow=ENA, White=ADJ and Black-GND

How to Identify Pin Assignments

How to mount UB Series LED Strips

How to mount MS456UB LED Driver

How to disable 'ENA" on MS456UB



This LED Backlight Kit is compatible with the following LCD Screen:
MakeSizeScreen NumberPart Number
Chi Mei 18M180E1-L02UB100370LED4530X2
Chi Mei 18M180E1-L03UB100370LED4530X2
Chi Mei 18M180E1-XXUB100370LED4530X2
Hydis18.1HT18E22-200UB100370LED4530X2
Hydis18.1HT18E22-300UB100370LED4530X2
IDTech18.1ITSX94UB100370LED4530X2
IDTech18.1ITSX94N1UB100370LED4530X2
IDTech18.1ITSX98EUB100370LED4530X2
LG Philips18.1LM181E05-C3UB100370LED4530X2
LG Philips18.1LM181E05-D4UB100370LED4530X2
LG Philips18.1LM181E06-A4M1UB100370LED4530X2
NEC18.1NL128102BC28-09UB100370LED4530X2
Sharp18.1LQ181E1DG11UB100370LED4530X2
Sharp18.1LQ181E1LW31UB100370LED4530X2
Buy Now
CCFL vs UB LED Backlight Kit - See the Difference!
Please click here for more details

MS133WLCD340
3860X2640 4K LCD Kit
HyperLink
LST05-V3
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
HyperLink  
IT03
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
HyperLink
Sunlight Readable LCD
Simply swap out your defective LCD screen, you now have a sunlight readable Monitor.
HyperLink

UB Series LED Kit
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 1, 2, 4 and 6 CCFL backlight lamps.
HyperLink  
SB Sereis LED Kit
These super bright LED upgrade kits are designed for LCD screens that original equipped with its manufacturer’s LED strip
HyperLink  
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen, ATM and other type of touch screen.
HyperLink  
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
HyperLink
LCD Screen
Huge selections of industrial LCD screens
 HyperLink

Open Frame Display
Direct Drop in Replacement LCD display
HyperLink
Touch Screen
Resistive and capacitive touch screens
HyperLink
LCD Kit
These LCD kits included LCD controller, LED screen, Push button key and screen wire harness.
HyperLink
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
HyperLink
   
Copyright © 1996-2018 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog