LST04 LCD Screen Tester
|
We have completely redesign LST04 LCD screen tester by
adding single chip computer, color bar generator,
short circuit protection, isolation circuit…etc. LST04 is much more dependable. It is easy to use, by simply changing the setting parameter, it allows you to test LCD screen size up to
60" and the resolution from 800X600 up to 1920X1080
Key features:
Single Chip Computer:
Using a single chip computer to control 24 resolutions from 800X600 to 1920X1200.
Color bar Generator:
Press button A to change color bar pattern. Press button B to change images quality and press button C to set it auto change.
Panel B+:
To change panel supply voltage, press button B for 5 second. When power is disconnect, B+ will reset back to 3.3V. This is very helpful, especially after you have test a 12V B+ LCD screen, then immediately test 3.3V LCD screen.
Shorted Circuit Protection:
When Panel B+ is short, such as using a wrong screen wire harness, LED display will be display “00” and you will also hear a loud warning
sound. LST04 will shut down immediately by itself. To reset LST04, disconnect 12V DC jack and reconnect it back.
VGA Input:
You can apply special test pattern to test
LCD screen. Color bar generator will auto turn off when external signal apply to VGA Input connector.
VGA Output:
This is for people who wants to apply special test pattern to compare between good screen and test screen. Both LCD screen are display the exact pattern.
|
|
|
|
|
|
Please click here for LST04 cross reference table
|
|
LST04 - $229.99
This basic unit comes with LED screen wire (I-PEX-20455-040-20) for testing LED/LCD screen that have resolution from 1024X600 to 1366X768.
Note: There is no need to purchase additional screen wire harness and AC-DC adapter if you have LST02 or LST03. They are compatible with LST04
Note: AC-DC Adapter does not included. It is available at the checkout page in case you need it.
|
|
We had also bundled LST04 in 3 different packages:
Laptop Screen Repair Pack
Industrial Repair Pack
LCD TV screen Repair Pack
Included screen wire harness are mentioned on each pack below.
Note: AC-DC Adapter does not included. It is available at the checkout page in case you need it.
|
|
Laptop screen Tester Kit - $319.99
This Kit includes most common screen wire harness for testing Laptop screen:
FIX-30S-1LVDS
FIX-30S-1LVDS-20P
DF19-20P-1LVDS-121W
I-PEX-20455-040
Part Number: LST04-LAPTOP
Note: AC-DC Adapter does not included. It is available at the checkout page in case you need it.
|
Industrial LCD Screen Tester Kit - $329.99
This Kit includes most common screen wire harness for testing Industrial LCD screen:
DF14-20P-1LVDS
DF14-20P-1LVDS-R
FIX-30S-2LVDS-16"
FIX-30S-2LVDS-R
DF19-30P-2LVDS
Part Number: LST04-INDUSTRIAL
Note: AC-DC Adapter does not included. It is available at the checkout page in case you need it.
|
TV screen Tester Kit - $339.99
This Kit includes most common screen wire harness for testing LCD TV screen:
FI-RE51S-HF-B15
FI-RE51S-HF-B4851
FIX-30S-2LVDS-16"
FIX-30S-2LVDS-R
FIX-30S-1LVDS6-B2630
FIX-30S-1LVDS8-B14
Part Number: LST04-TV
|
|
|
|
|
Additional parts that can be used on LST04
|
MS465DI - Inverter Board
MS465DI can driver 1 lamp, 2 lamps and 4 lamps LCD screen, It also comes with 6 pin wire harness that one end connect to 6 pin (#1) on LST04
$69.99
|
|
TST01
TST01 – custom build for testing 4 wires, 5 wires and 8 wires resistive touch screen.
LST05-V3
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
IT03
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
Sunlight Readable LCD
Simply swap out your defective LCD screen, you now have a sunlight readable Monitor.
UB Series LED Kit
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 1, 2, 4 and 6 CCFL
backlight lamps.
SB Sereis LED Kit
These super bright LED upgrade kits are designed for LCD screens that original equipped with its manufacturer’s LED strip
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen,
ATM and other type of touch screen.
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are
commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
LCD Screen
Huge selections of industrial LCD screens
Open Frame Display
Direct Drop in Replacement LCD display
Touch Screen
Resistive and capacitive touch screens
LCD Kit
These LCD kits included LCD controller, LED screen, Push button key and screen wire harness.
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
|